Can you paint stone fireplaces

Painting a brick fireplace surround is a more straightforward DIY job than you might think and involves similar steps to painting a wall or any other surface.

Related: Fireplace Surrounds Buying Guide. Whichever paint you choose, remember to consider your decor. Ask yourself whether you want your fireplace to blend in or stand out. For painting on brick, you will also need a primer and a sealer.

If you have an active fireplace, this will prevent soot from coming through and staining the paintwork. If not, then primer will help make your topcoat of colour stand out much more. You can buy a three-in-one primer from most hardware and garden centres.

Leave your fireplace to dry overnight. Remember to put down sheets to avoid getting paint and primer on your flooring or walls! Use a roller to apply your primer, but you may still need a brush to go over any missed spots. See if there are any cracks to be filled in with caulking. Let the caulking dry if this is the case. Start painting on the topcoat once the primer has dried — with heat-resistant paint, if necessary.

One of the main things that can go wrong when painting your fireplace is that you can drop paint over the floor! This is why you need to put sheets down beforehand. Using the wrong paint or not using a primer can lead to dirt and soot coming through to ruin your paintwork. Another issue would be that you will see the bare brick through the paint — which defeats the whole object. You can paint a stone fireplace, and it is incredibly similar to a brick fireplace for the process involved. Related: Different Types of Stone Fireplaces.

Painting a stone fireplace is similar to painting a brick fireplace. For painting a stone fireplace, you will also need a primer and a sealer, both of these are available in a three-in-one, which includes an undercoat. If you have an active fireplace, this will prevent soot from staining your paintwork. A primer will help make your topcoat stand out and prevent the bare brick showing through. Use your scrubbing brush to remove any dirt or dust, as this will ensure your primer and paint dries properly when applied and has maximum effect.

You need to put a three-in-one primer down — which includes a primer, sealer, and undercoat — using a roller. Once your primer is dry, use caulking to fill in any cracks in the stonework. Let the caulking dry before applying your second coat of primer. Start painting on the topcoat once the second coat of primer is completely dry. If your fireplace is still active, use heat-resistant paint. The potential problems, like the painting process, are the same as when painting a brick fireplace — see above.

You can paint a marble fireplace and its surround. You can choose to apply the latex paint to the stone right out of the can for complete coverage or you can water down the paint to create a thin film that allows some of the original stone to show through.

Painting your stone with one solid color paint gives a total painted look with none of the original stone showing through. Depending on the color paint you use, this look can tone down the harsh look of stone and add a more soothing, monochromatic vibe to your room.

When you think of painting your stone fireplace, what color paint comes to mind? When most people think of painting their fireplace, they sometimes consider white the only acceptable color choice.

What you may not realize is that white paint comes in a variety of shades. You can choose what type of latex paint product you want to use on your stone fireplace. Step 2 — Clean the Fireplace — Use your scrub brush along with a bucket of soap and water to clean your stone to remove any dirt, dust or soot.

Rinse with water and let the stone dry. Remove all ashes, logs, etc. Step 3 — Apply the Primer — Use the large brush to apply primer to the stone fireplace in the large areas. Then use the smaller brushes to cut in around the walls and mantel as well as to get paint into any tight spots. Do not use primer on the firebox area where the fire burns.

Step 4 — Brush on the Latex Paint — Again, use your large brush to apply paint on the stones in the large, open areas and the smaller brushes to get paint into the tighter spots. Step 5 — Paint the Firebox With High Temperature Paint — Open doors and windows to allow for plenty of ventilation since high temp grill and stove paint has a very strong odor until it dries. When painting a smooth surface such as a wall, most roller covers would work. However, with an uneven, rough surface such as stone, a roller cover with a nap of at least one inch is necessary.

In addition, use a heavy duty, 5-wire roller frame for maximum strength. Plastic roller frames can bend or break from the extra force you will apply to get paint into all crevices and pores. For brushwork, use professional-grade paintbrushes with wood handles and synthetic bristles.

These provide the best results when using latex paint. Purchase different sizes of brushes for the job. Wiggle the brush up and down and back and forth to push the paint in. This seals porous surface material so the topcoat won't soak in and dry unevenly. It also helps prevent peeling, rusting and bleed-through.

Pour primer into a paint tray and coat your roller. Follow the top-down rule—work from the top to the bottom to get the most even coverage. Use brushes for cutting in and getting into tight spaces. Let the primer dry completely before starting to paint. Again, follow the top-down rule. Use two coats for optimal results. Close up your paint cans and dispose of used cans appropriately. Cleaning paintbrushes and other tools can be made easy with warm, soapy water.

Thoroughly rinse your roller covers and brushes in water until the water runs clear.